• KeXon Pays Attention to the Appearance and Design of Plastic Caps

    KeXon Pays Attention to the Appearance and Design of Plastic Caps


    As a part of the closure, the cap has always been concerned about the sealing performance, but few people understand the function of the cap, the appearance of the cap on the product. In fact, a chic cap design is able to leave a good impression on the product, but also to bring good sales to the product. On the other hand, in order to seal, the cap design sometimes causes trouble in opening, and how to conveniently open the cap and ensure the sealing is the most important. Only when we pay attention to the appearance and design of the plastic cap, can the bottle cover field bring more changes. Caps are used in a wide range of applications. There are several major blocks in the main market. Wine bottle caps, this is a relatively profitable piece of cap. The pseudo-function of the wine bottle cap market offers many possibilities for the manufacturer's additional profit, which is worthy of deep exploration by manufacturers. Another big market for caps is in the field of beverage caps. Although the market is meager, the standard is uniform and suitable for large-scale production. This market has a supplier of Coke, listed company Zijiang. In fact, there are cosmetics. Bottle caps and tinplate caps, although these markets are niche, they also breed many companies. It is worth paying attention to. Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating development, production and sales. It owns a factory (Yuyao Kexing Sprayer Factory) with a plant area of over 6,000 square meters and more than 20 years of various types. Daily packaging production experience, can professionally produce all kinds of foam pumps, plastic covers, daily and medicinal plastic...

  • The Specific Working Principle of the Lotion Pump

    The Specific Working Principle of the Lotion Pump


    The lotion pump is also generally called a hand sanitizer pressure pump. It can be used almost everywhere in life, like cosmetics, skin care products, detergents, and other aspects. When using, we first press the air in the liquid storage chamber (that is, the plastic tube that can wash the hair water). When the air is exhausted, press the pump head again. After the loose hand, the spring in the pump head. To restore the original state, a vacuum will be formed in the liquid storage chamber to generate a negative pressure. At this time, the pressure in the container is consistent with the atmospheric pressure, and then the pressure in the liquid storage chamber is small and the pressure inside the container is large. Due to the pressure difference, the atmosphere will press the liquid around the reservoir cavity into the reservoir, giving the impression that the pump head sucks up the liquid. The specific principle is as follows: First press-When we press the actuator for the first time, we push the sub-stem together with the main stem to compress the spring. During the compression spring, the outer wall of the piston rubs against the inner wall of the body to urge the piston to open the discharge hole of the sub-stem; when the piston slides down, the body is discharged through the secondary sub-stem discharge hole; Reciprocating multiple presses- all the air in the body is discharged. Aspirate-After pressing the actuator through the main stem, the sub-stem, the piston, the common compression spring to discharge the air in the body , release the actuator, the spring moves upward due to the loss of pressure. At this time, the piston also moves downward through...

  • The Airless Bottle And It’s Advantages

    The Airless Bottle And It’s Advantages


    It's all about packaging! We hear that a lot. You've created an amazing formula and want to shout out to the world that you have something to help people feel better, younger, more at home. Professional packaging is needed to make marketing easier and improve the ability to attract customers' attention. Providing luxurious beauty packages for your products will greatly enhance your confidence in the products, thus promoting additional sales. Airless bottle bottles will help extend the product's shelf life, and there are more reasons to consider using such packaging for skin care products. An airless bottle is a non - pressurized vacuum distribution system in which mechanical pumps are used. Once the bottle is full, the material stored in the bottle is preserved and left intact until it is used up. Using a traditional pump bottle, when the content is low, it is usual to remove the pump and try using a spatula type tool to remove the remaining material. As the pumps are opened repeatedly and the contents exposed to air, some products will eventually be oxidized and lose their effectiveness. With a gas free bottle, the material inside the bottle will be fully allocated, which does not require the opening of the pump, so the integrity of the content will remain stable throughout its use. Use airless bottle for other advantages - 1. Use less or no chemical preservatives. 2. Let organic and natural purposes actually reach the home and deliver to the user. The bottle doesn't need to sit up properly to pull out the contents. In the case of a traveling artist or artist, the content can be allocated immediately upon retrieval from memory without waiting for the content to...

  • Fine Mist Sprayer Is Necessary in Our Daily Life

    Fine Mist Sprayer Is Necessary in Our Daily Life


    The fine mist sprayer system consists of water purification filtration system, water temperature control, water level control, constant pressure water supply, multi-line water delivery, intelligent instrumentation and humidity control. The tap water passes through the filter to become demineralized water and is sent to the water tank. The water tank is provided with an upper and lower water level control system, and is provided with a water temperature heating and temperature control system. The softened water enters the high pressure pump, the high pressure pipeline, and the nozzle to form a fine mist sprayer system. The high pressure water pump is driven by a motor, and the intelligent meter, the humidity sensor and the high pressure solenoid valve form a humidity control system. The pressure pump pressurizes the softened tap water to 5 MPa and delivers it to the back splash nozzle through the high pressure line. The reverse splash principle ensures that the nozzle does not drip. The high-pressure water forms a vortex that rotates at a high speed in the nozzle, and sprays water mist particles having a diameter of 2 μm to 6 μm through the micropores. The water mist is in full contact with the flowing air for heat and moisture exchange, increasing the moisture content of the air and lowering the temperature. During this process, the total enthalpy of the air is constant and is equal to the humidification process. The high-pressure spray system has a small footprint and is easy to install, which does not affect the lighting of the workshop or the normal production. Ningbo KeXon Plastic Co., Ltd. is a professional plastic packaging enterprise. The company owns a factory (Yuyao KeXon Sprayer Factory), and we have more...

  • Trigger Sprayer Is Widely Used in the Spray Pretreatment Process

    Trigger Sprayer Is Widely Used in the Spray Pretreatment Process


    Applications: Metal cleaning, degreasing, phosphating in surface treatment, and other low pressure sprays. It is a trigger sprayer that is widely used in the spray pretreatment process. There are two connection methods: clip type and thread type. The clip type is fixed to the pipe by a spring clip, and the thread type is directly connected by a thread. The trigger sprayer provides three spray patterns: hollow cone, solid cone, and fan. A variety of series are formed by a spherical sprayer or by indirectly connecting the sprayers through a threaded ball or a quick release ball. During use, the spray direction of the spray head can be adjusted quickly and accurately. The spray head is disassembled very quickly, and the new spray head can be replaced by directly screwing down by hand to meet various application needs. The materials used are glass fiber reinforced polypropylene and carbon fiber reinforced polypropylene. Corrosion-resistant and wear-resistant, with a maximum temperature resistance of 120 degrees and a maximum pressure resistance of 7kg. The atomizing sprayer is often used in the furniture spray booth, and the spray remover is sprayed on the mold by spraying the protective agent. Precise operation of resin and wax in the blender, automatically adjusting the application rate based on the slice tonnage to prevent over- or waste. Precise application of release agent and humidification before the sheet enters the press, automatically adjust the application rate based on the line speed to ensure the proper amount of spray. Humidify the product or warehouse with a fine atomizing sprayer. Use air knives and blower components for drying and blowing to remove dust and remove residual materials, creating air curtains and cooling products. Wide-angle sprayers for cleaning...

  • Various Trigger Sprayer Provides A Wide Range of Choice

    Various Trigger Sprayer Provides A Wide Range of Choice


    There are many types of sprayers, and the range of choice is large. Generally speaking, sprayers for degreasing and water washing processes can be selected with jet sprayers with strong impact force: the "V" type fan nozzle is taken as an example, and the spray angle 60 degreeis the best, with a large impact force; and the nozzle of the phosphating process can choose a centrifugal nozzle with good atomization, fine water particles and weak impact force: take "Z" type cone nozzle as an example The optimal distance of the nozzle from the workpiece is 40cm ~ 50cm, and has a spray effect of dispersing and atomizing the liquid. The arrangement of the sprayers on the nozzle can be in the form of parallel and cross, and the channel type adopts vertical cross arrangement, and the spraying effect is better. The factors that select the trigger sprayer are flow, pressure, spray angle, coverage, impact force, temperature, material, application, etc., and these factors are often intertwined and mutually constrained. Flow and pressure, spray angle and coverage are proportional. The purpose of any nozzle injection is to maintain continuous contact of the bath with the work piece. This factor is more important than pressure. The temperature of the liquid does not affect the spray performance of the trigger sprayer, but it affects the viscosity and specific gravity, as well as the choice of material. The material of the trigger sprayer should also be determined according to the chemical characteristics of the bath. For non-corrosive baths, bronze casting or plastic die casting can be used according to the difficulty of processing. In order to prevent corrosion, non-metallic materials may be used; for strong etching baths such as sulfuric...