• Distinguishing the Quality of the Fine Mist Sprayer II

    Distinguishing the Quality of the Fine Mist Sprayer II

    06-09-2018

    The factors that use the sprayer are flow, pressure, spray angle, coverage, impact force, temperature, material, application, etc., and these factors are often intertwined and mutually constrained. Flow and pressure, spray angle and coverage are proportional. The purpose of any fine mist sprayer injection is to maintain continuous contact of the bath with the workpiece. This factor is more important than pressure. The temperature of the liquid does not affect the fine spray performance of the fine mist sprayer, but it affects the viscosity and specific gravity, as well as the choice of material. The material of the fine mist sprayer should also be determined according to the chemical characteristics of the bath. For non-corrosive baths, bronze casting or plastic die casting can be used according to the difficulty of processing. In order to prevent corrosion, non-metallic materials may be used; for strong etching baths such as sulfuric acid and hydrochloric acid, nylon plastic may be used; fine mist sprayer materials for phosphating baths are generally made of acid-resistant stainless steel, and fine mist sprayers for preventing corrosion may also be directly selected from stainless steel or Made of nylon material. For fine mist sprayers with a certain impact force, a small angle fine mist sprayer should be used, and the liquid column flow (ie, jet) is the best; the fan fine mist sprayer is suitable for cleaning, degreasing, cooling, etc. The cone fine mist sprayer is suitable for drifting, surface layer, phosphating, humidifying. In the aspect of dust removal, etc.; the venturi mixing fine mist sprayer should be installed in the paint storage tank and the tank body. Take the "H" type stirring fine mist sprayer (also known as the venturi fine mist sprayer)...

  • The Selection Method for Trigger Sprayer

    The Selection Method for Trigger Sprayer

    13-09-2018

    There are many types of sprayers and the range of choice is large. Generally speaking, sprayers for degreasing and water washing processes can be selected with jet sprayers with strong impact force. The factors that select the trigger sprayer are flow, pressure, spray angle, coverage, impact force, temperature, material, application, etc., and these factors are often intertwined and mutually constrained. Flow and pressure, spray angle and coverage are proportional. The purpose of any trigger sprayer injection is to maintain continuous contact of the bath with the workpiece. This factor is more important than pressure. The temperature of the liquid does not affect the spray performance of the trigger sprayer, but it affects the viscosity and specific gravity, as well as the choice of material. The material of the trigger sprayer should also be determined according to the chemical characteristics of the bath. For non-corrosive baths, bronze casting or plastic die casting can be used according to the difficulty of processing. In order to prevent corrosion, non-metallic materials may be used; for strong etching baths such as sulfuric acid and hydrochloric acid, nylon plastic may be used; trigger sprayer materials for phosphating baths are generally made of acid-resistant stainless steel, and sprayers for preventing corrosion may also be directly selected from stainless steel or Made of nylon material. For sprayers with a certain impact force, a small angle trigger sprayer should be used, and the liquid column flow (ie jet) is the best; the fan trigger sprayer is suitable for cleaning, degreasing, cooling, etc. The cone industrial trigger sprayer is suitable for drifting, surface layer, phosphating, Humidification, dust removal, etc.; venturi mixing trigger sprayer should be installed in the paint storage tank and tank body. Take...

  • There Are Differences in Sprayer Bottles of Different Materials

    There Are Differences in Sprayer Bottles of Different Materials

    18-09-2018

    The flow rate is mainly affected by the pore size and pressure of the orifice. Under normal circumstances, the larger the orifice diameter, the larger the flow rate; the same pressure, the greater the pressure, the flow will increase. In addition, the flow rate is also affected by the spray medium. Under the same pore diameter and the same pressure, the flow rate will decrease as the viscosity of the medium increases. Second, the pressure. under normal circumstances, the sprayer will only achieve the desired atomization effect when the standard pressure is reached. If the pressure is lower than the minimum required for the sprayer, the atomization effect will be discounted, and the pressure will also affect the sprayer flow. Increasing the pressure can increase the flow rate of the sprayer without changing the sprayer parameters. In general, equipment such as a booster pump can be used to increase the pressure of the liquid, and equipment such as an air compressor can be used to increase the pressure of the gas. Third, the spray angle. The angle of sprayer bottles the refers to the angle at which the atomized liquid is scattered. Even if it is the same sprayer, it can have a variety of sprayer bottle angles to choose from, depending on the customer's needs, but even the same sprayer, under different pressures, the spray There will also be minor differences in angles. Under normal circumstances, the larger the spray angle, the greater the coverage of the installation height and pressure. Fourth, coverage. The spray coverage is mainly restricted by the spray angle and the sprayer installation height. When the other parameters of the sprayer are fixed, the larger the spray angle of the...

  • Selecting Fan-shaped Sprayer Bottle Is More Efficient and Better

    Selecting Fan-shaped Sprayer Bottle Is More Efficient and Better

    20-09-2018

    Regardless of the use of the product, the most important thing is of course the efficiency problem. The use of sprayers requires more attention to the more efficient use of the product, especially in the current era of speed pursuit, of course, the efficiency can not be too low. In the current selection of sprayer bottle, the efficiency of the fan sprayer is better. It can be said that the spray shape edge of the design of the fan sprayer is well defined, and the flow guiding plane which is more advantageous for the fine processing provides a uniform, high impact spray shape. More efficient use of lifting sprayers! Because the development of the sprayer industry is now more, the efficiency of the various spiral sprayers developed and produced is flat, and the design of the spray channel relatively directly affects the spray effect. However, the design of the fan sprayer is different. The design of the spray channel is large and smooth, which reduces the blockage and improves the efficiency. The fan-shaped profile of the spray produces a tapered edge. The spray particles are fine and uniform, and the spray particles are medium in size. When the sprayers are arranged, a 25% to 30% overlap is required to make the arrangement in the entire direction uniform. The fan-shaped spray spray can produce a variety of angles, and the water flow is uniform. The droplet size is medium-sized and the unit is connected by means. It is easy to install and replace the filter, and it is easy to clean. This is the more efficient use of fan sprayers and the principle of efficiency! Use sprayers with higher efficiency. The better use of fan-shaped sprayers...

  • Learn About Some Different Daily Chemical Plastic Pumps

    Learn About Some Different Daily Chemical Plastic Pumps

    10-01-2020

    Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. Learn about some different types of daily chemical plastic pump: 1. The thickness of the pump head is determined by the caliber of the matching bottle body. The spray standard is 12.5mm—24mm-24 mm, and the water yield is 0.1ml/ time-0.2 ml/time. It is generally used for matching perfume, gel water and other commodity packages. The shampoo 28 pump head can receive the same caliber according to the height of the bottle body. 2. Special dispensers such as foam pump head and hand-held spray head. Foam pump head is a non-pneumatic hand-held pump head, which does not need to be filled with air to generate foam, and only needs light pressing to generate quantitative high-quality foam. Generally, there are special bottles. Hand-held sprinklers are commonly used in cleaning agents and other commodities. 3. Vacuum bottles are generally cylindrical in shape, with a standard of 15 mL-50mL, each with 100ml, and the total capacity is small. The principle of atmospheric pressure is used to prevent cosmetics from being polluted during use. Vacuum bottles are made of aluminum carbide, plastic electroplating and colored plastic. The quotation is more expensive than other common containers, and the general order quantity demand is not high. For more information, please click here: https://www.chinafoampump.com/

  • Classification of Foam Pumps and Their Uses

    Classification of Foam Pumps and Their Uses

    23-10-2019

    What is a foam pump? That is, the liquid forms a certain negative pressure around the liquid column after being jetted out rapidly, and the suction gas generated by the negative pressure enters the mixing part, so that the air and the liquid are mixed again to form bubbles, which are jetted out of the foam pump product. Foam pumps are classified according to one of his output. Generally speaking, there are three kinds. 1.The 0.4cc foam pump, which has a diameter of 30 teeth on the market. Mainly used for women's care liquid, hand sanitizer and facial cleaning Mu Si, etc. 2.The 0.8cc foam pump. There are usually 40 teeth and 43 teeth in the market. Mainly used for foam cleansing Mu Si, baby foam shampoo and body wash, foam hand sanitizer, etc. 3.The 3-gram foam pump introduced by KeXon Plastic, so the output is 3cc and 3.5cc, so the tooth diameter is 58 teeth. Mainly used for adult foam shower gel. Cleanser, facial cleanser Mu Si, shampoo and hand sanitizer, etc. Ningbo kexon plastic co., ltd. is a comprehensive plastic packaging enterprise integration design, production, and sales. if you want to know more relevant information, you can click here:https://www.chinafoampump.com/