• The Airless Bottle And It’s Advantages

    The Airless Bottle And It’s Advantages

    09-08-2018

    It's all about packaging! We hear that a lot. You've created an amazing formula and want to shout out to the world that you have something to help people feel better, younger, more at home. Professional packaging is needed to make marketing easier and improve the ability to attract customers' attention. Providing luxurious beauty packages for your products will greatly enhance your confidence in the products, thus promoting additional sales. Airless bottle bottles will help extend the product's shelf life, and there are more reasons to consider using such packaging for skin care products. An airless bottle is a non - pressurized vacuum distribution system in which mechanical pumps are used. Once the bottle is full, the material stored in the bottle is preserved and left intact until it is used up. Using a traditional pump bottle, when the content is low, it is usual to remove the pump and try using a spatula type tool to remove the remaining material. As the pumps are opened repeatedly and the contents exposed to air, some products will eventually be oxidized and lose their effectiveness. With a gas free bottle, the material inside the bottle will be fully allocated, which does not require the opening of the pump, so the integrity of the content will remain stable throughout its use. Use airless bottle for other advantages - 1. Use less or no chemical preservatives. 2. Let organic and natural purposes actually reach the home and deliver to the user. The bottle doesn't need to sit up properly to pull out the contents. In the case of a traveling artist or artist, the content can be allocated immediately upon retrieval from memory without waiting for the content to...

  • Fine Mist Sprayer Is Necessary in Our Daily Life

    Fine Mist Sprayer Is Necessary in Our Daily Life

    15-08-2018

    The fine mist sprayer system consists of water purification filtration system, water temperature control, water level control, constant pressure water supply, multi-line water delivery, intelligent instrumentation and humidity control. The tap water passes through the filter to become demineralized water and is sent to the water tank. The water tank is provided with an upper and lower water level control system, and is provided with a water temperature heating and temperature control system. The softened water enters the high pressure pump, the high pressure pipeline, and the nozzle to form a fine mist sprayer system. The high pressure water pump is driven by a motor, and the intelligent meter, the humidity sensor and the high pressure solenoid valve form a humidity control system. The pressure pump pressurizes the softened tap water to 5 MPa and delivers it to the back splash nozzle through the high pressure line. The reverse splash principle ensures that the nozzle does not drip. The high-pressure water forms a vortex that rotates at a high speed in the nozzle, and sprays water mist particles having a diameter of 2 μm to 6 μm through the micropores. The water mist is in full contact with the flowing air for heat and moisture exchange, increasing the moisture content of the air and lowering the temperature. During this process, the total enthalpy of the air is constant and is equal to the humidification process. The high-pressure spray system has a small footprint and is easy to install, which does not affect the lighting of the workshop or the normal production. Ningbo KeXon Plastic Co., Ltd. is a professional plastic packaging enterprise. The company owns a factory (Yuyao KeXon Sprayer Factory), and we have more...

  • Trigger Sprayer Is Widely Used in the Spray Pretreatment Process

    Trigger Sprayer Is Widely Used in the Spray Pretreatment Process

    21-08-2018

    Applications: Metal cleaning, degreasing, phosphating in surface treatment, and other low pressure sprays. It is a trigger sprayer that is widely used in the spray pretreatment process. There are two connection methods: clip type and thread type. The clip type is fixed to the pipe by a spring clip, and the thread type is directly connected by a thread. The trigger sprayer provides three spray patterns: hollow cone, solid cone, and fan. A variety of series are formed by a spherical sprayer or by indirectly connecting the sprayers through a threaded ball or a quick release ball. During use, the spray direction of the spray head can be adjusted quickly and accurately. The spray head is disassembled very quickly, and the new spray head can be replaced by directly screwing down by hand to meet various application needs. The materials used are glass fiber reinforced polypropylene and carbon fiber reinforced polypropylene. Corrosion-resistant and wear-resistant, with a maximum temperature resistance of 120 degrees and a maximum pressure resistance of 7kg. The atomizing sprayer is often used in the furniture spray booth, and the spray remover is sprayed on the mold by spraying the protective agent. Precise operation of resin and wax in the blender, automatically adjusting the application rate based on the slice tonnage to prevent over- or waste. Precise application of release agent and humidification before the sheet enters the press, automatically adjust the application rate based on the line speed to ensure the proper amount of spray. Humidify the product or warehouse with a fine atomizing sprayer. Use air knives and blower components for drying and blowing to remove dust and remove residual materials, creating air curtains and cooling products. Wide-angle sprayers for cleaning...

  • Various Trigger Sprayer Provides A Wide Range of Choice

    Various Trigger Sprayer Provides A Wide Range of Choice

    28-08-2018

    There are many types of sprayers, and the range of choice is large. Generally speaking, sprayers for degreasing and water washing processes can be selected with jet sprayers with strong impact force: the "V" type fan nozzle is taken as an example, and the spray angle 60 degreeis the best, with a large impact force; and the nozzle of the phosphating process can choose a centrifugal nozzle with good atomization, fine water particles and weak impact force: take "Z" type cone nozzle as an example The optimal distance of the nozzle from the workpiece is 40cm ~ 50cm, and has a spray effect of dispersing and atomizing the liquid. The arrangement of the sprayers on the nozzle can be in the form of parallel and cross, and the channel type adopts vertical cross arrangement, and the spraying effect is better. The factors that select the trigger sprayer are flow, pressure, spray angle, coverage, impact force, temperature, material, application, etc., and these factors are often intertwined and mutually constrained. Flow and pressure, spray angle and coverage are proportional. The purpose of any nozzle injection is to maintain continuous contact of the bath with the work piece. This factor is more important than pressure. The temperature of the liquid does not affect the spray performance of the trigger sprayer, but it affects the viscosity and specific gravity, as well as the choice of material. The material of the trigger sprayer should also be determined according to the chemical characteristics of the bath. For non-corrosive baths, bronze casting or plastic die casting can be used according to the difficulty of processing. In order to prevent corrosion, non-metallic materials may be used; for strong etching baths such as sulfuric...

  • How to Make a Test on Plastic Caps

    How to Make a Test on Plastic Caps

    23-08-2018

    How to properly control the sealing performance of the cap is the focus of the production unit on-line or off-line testing. For plastic caps, because of the degree of sealing, a positive pressure seal tester is used, but the market positive pressure seal The tester directly blows compressed air into the sealed bottle, which inevitably explodes when the bottle is flawed. According to experts, a 2.5-liter cola bottle explodes at 1.2 MPa, which is quite destructive. For 100-150 grams of explosives. The national standard GB/T17876-1999 specifically specifies the detection of the plastic anti-theft cap, such as the opening torque of the cap, thermal stability, drop resistance, leakage and sealing performance. Among them, the sealing performance and the opening of the cap and the tightening torque are effective ways to solve the sealing performance of the plastic anti-theft cap. Depending on the use of the cap, there are different regulations for the test methods that do not include a gas cap and a gas cap. If the gas cap is not included, the cap should be cut off and the anti-theft ring (strip) should be used for sealing the rated torque of not less than 1.2NM. Test with a seal tester, pressurize to 200 kPa, and keep the pressure under water for 1 minute to observe whether it leaks. Gas or tripping; the gas-containing cap is pressurized to 690 kPa, and the pressure is maintained under water for 1 minute. Observe the gas leak, and then increase the pressure to 1207 kPa, maintain the pressure for 1 minute, and observe whether the cap is tripped. The instrument can be used for the quantitative measurement of leakage and sealing performance of standard plastic anti-theft caps (including gas...

  • Distinguishing the Quality of the Fine Mist Sprayer I

    Distinguishing the Quality of the Fine Mist Sprayer I

    04-09-2018

    Since the sprayer is designed to operate under a variety of different spray conditions, the sprayers that are suitable for the application are selected to achieve optimum spray performance during use. The characteristics of the sprayer are mainly reflected in the type of spray of the sprayer, that is, the shape formed when the liquid leaves the sprayer opening and its running performance. The name of the sprayer is divided into a fan shape, a cone shape, a liquid column flow (ie, a jet), an air atomization, and a flat fine mist sprayer. The cone sprayer is divided into two types: a hollow cone and a solid cone; The fine mist sprayers (ie, mixing fine mist sprayers), the strong (hot) tuyere blowing fine mist sprayers, and the special fine mist sprayers (such as garden fine mist sprayers, cylinder washing fine mist sprayers, tube cleaning fine mist sprayers, etc.) are named after the fine mist sprayer performance. There are many types of sprayers, and the range of choice is large. Generally speaking, fine mist sprayers for degreasing and water washing processes can be selected with jet fine mist sprayers with strong impact force: the "V" type fan fine mist sprayer is taken as an example, and the spray angle is 60 degree is the best, with a large impact force; and the fine mist sprayer of the phosphating process can choose a centrifugal fine mist sprayer with good atomization, fine water particles and weak impact force: take "Z" type cone fine mist sprayer as an example The optimal distance of the atomizing fine mist sprayer from the workpiece is 40cm~50cm, and has the function of dispersing and atomizing the liquid. The arrangement of the fine mist...